- Подшипники Дистрибьюторы Inc
- Радиально-упорные шарикоподшипники Подшипниковые узлы SL Type Cylindrical Roller Bearings for Sheaves NTN
Русский язык
English
العربية
Deutsch
Ελληνικά
Español
Français
Bahasa Indonesia
Italiano
日本語
Português
Shqip
Svenska
ไทย
Türkçe
Українська
- Адрес1589 Tampines Промышленный дистрибьютор Avenue 5 Singapore 528759
- Адрес завода1589 Tampines Промышленный дистрибьютор Avenue 5 Singapore 528759
- рабочее время9.00--18.00
- Рабочий телефон(рабочее время)0065-31591338
- Рабочий телефон(Нерабочее время)0065-31591338
- Факс 0065-31591338
Single Row Tapered Roller Bearings Inch
Отправить запросSingle row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e (→ product table): the larger the value of e, the larger the contact angle.
Bearing features
Low friction
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear. In addition, the bearings can better maintain preload and run at reduced noise levels.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|